D-Link DAP-1155 User Manual page 86

DAP-1155 Wireless N150 Access Point & Router
User Manual
Figure 73. The page for creating a new PPTP + Static IP connection. The Ethernet section.
Parameter
MTU
MAC
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC address of your computer icon
( ) to set the MAC address of the network interface card (of the
computer that is being used to configure the access point at the
moment) as the MAC address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
You can click the Restore default MAC address icon (
set the access point's MAC address.
Page 86 of 158
Description
Configuring Device
) to