Virtual Server Settings Wizard - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Virtual Server Settings Wizard

To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the
LAN, click the Virtual server settings wizard link in the Home section.
On the opened page, you can specify the following parameters:
Parameter
Template
Name
Interface
Protocol
Public port (begin)/
Public port (end)
Figure 49. The page for adding a virtual server.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
Enter a name for the virtual server for easier identification. You can
specify any name.
Select a WAN connection to which this virtual server will be
assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
A port of the access point
address specified in the Private IP field. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Public port (begin) field and leave the
Public port (end) field blank.
Page 61 of 158
Description
from which traffic is directed to the IP
Configuring Device