DAP-1155 Wireless N150 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
Protocol
Action
Activate
Figure 104. The page for adding a rule for IP filtering.
General
A protocol for network packet transmission. Select a value from the
drop-down list.
Select an action for the rule.
Allow: Allows packet transmission in accordance with the criteria
specified by the rule.
Deny: Denies packet transmission in accordance with the criteria
specified by the rule.
If the checkbox is selected, the rule is enabled. Deselect the
checkbox to disable the rule.
IP Addresses
Page 132 of 158
Description
Configuring Device