D-Link DAP-1155 User Manual page 125

DAP-1155 Wireless N150 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
Open access from any
external host
IP address
Mask
Public port
Protocol
After specifying the needed parameters, click the Apply button.
To edit a rule for remote access, click the link to the relevant rule. On the opened page, change the
needed parameters and click the Apply button.
To remove a rule for remote access, select the checkbox located to the left of the relevant line in the
table and click the Delete button. Also you can remove a rule on the editing page.
Select the checkbox to allow access to the device for any host.
When the checkbox is selected, the IP address and Mask fields
are not available for editing.
A host or a subnet to which the rule is applied.
The mask of the subnet.
An external port of the access point. You can specify only one port.
The protocol available for remote management of the access point.
Page 125 of 158
Description
Configuring Device