D-Link DAP-1155 User Manual page 24

DAP-1155 Wireless N150 Access Point & Router
User Manual
6. In the opened window, in the list of available wireless networks, select the wireless network
DAP-1155 and click the Connect button.
7. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the Security key field and click the OK button.
8. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the device via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Figure 14. The list of available networks.
Page 24 of 158
Installation and Connection