Local Update - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Local Update

!
Attention! Do not turn off the access point before the firmware upgrade is completed.
This may cause the device breakdown.
To update the firmware of the access point locally, follow the next steps:
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Browse button on the System / Firmware upgrade page to locate the new
firmware file.
3. Click the Update button to upgrade the firmware of the access point.
4. Wait until the access point is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login (admin) and the current password.
After the upgrade is completed, the new version of the firmware will be displayed in the top left
corner of the page.
If after updating the firmware the access point doesn't work correctly, please restore the factory
default settings. To do this, place the mouse pointer over the System caption in the top left corner
of the page and click the (Reset to factory) icon. Wait until the access point is rebooted.
Page 149 of 158
Configuring Device