DAP-1155 Wireless N150 Access Point & Router
User Manual
PPPoE + Dynamic IP Connection
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page (for a detailed description of all the connection's
parameters, see the Creating PPPoE + Static IP or PPPoE + Dynamic IP WAN Connection
section, page 79).
Click the Next button to continue.
Figure 31. Configuring PPPoE + Dynamic IP WAN connection.
Page 43 of 158
Configuring Device