Status; Device Info - D-Link DIR-840 User Manual

Section 6 - Status
This page displays the current information for the DIR-840. It will display the LAN, WAN (Internet), and Wireless information. If
your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button
and a Disconnect button will be displayed. Use Disconnect to
drop the PPPoE connection and use Connect to establish the
PPPoE connection.
General: Displays the router's time and firmware version.
WAN: Displays the MAC address and the public IP settings.
LAN:
Displays the MAC address and the private (local) IP settings
for the router.
LAN Computers: Displays computers and devices that are connected to the
router via Ethernet and that are receiving an IP address
assigned by the router (DHCP).
D-Link DIR-840 User Manual

Status

Device Info

38