D-Link DAP-1155 User Manual page 135

DAP-1155 Wireless N150 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
Template
Name
Interface
Protocol
Public port (begin)/
Public port (end)
Private port (begin)/
Private port (end)
Private IP
Remote IP
Enable NAT Loopback
Click the Apply button.
To edit the parameters of an existing server, select the relevant server in the table. On the opened
page, change the needed parameters and click the Apply button.
To remove a server, select the checkbox located to the left of the relevant line in the table and click
the Delete button. Also you can remove a server on the editing page.
To remove all servers from this page, click the Clear all button.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
A name for the virtual server for easier identification. You can
specify any name.
A WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
A port of the access point from which traffic is directed to the IP
address specified in the Private IP field. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Public port (begin) field and leave the
Public port (end) field blank.
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (begin) field and leave the
Private port (end) field blank.
The IP address of the server from the local area network. To choose
a device connected to the access point's LAN at the moment, select
the relevant value from the drop-down list (the field will be filled in
automatically).
The IP address of the server from the external network.
If the checkbox is selected, users of the
access the server, which IP address is specified in the Private IP
field, using the access
address. If a DDNS service is configured on the Advanced /
DDNS page, the users can access the server via the device's domain
name.
Page 135 of 158
Description
access
point's external IP address as the server's IP
Configuring Device
point's LAN can