Flow Control - D-Link DAP-1155 User Manual

DAP-1155 Wireless N150 Access Point & Router
User Manual

Flow Control

On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the access point.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
To enable the flow control function, select the Enabled checkbox and click the Apply button.
To disable the flow control function, deselect the Enabled checkbox and click the Apply button.
Figure 102. The Advanced / Flow Control page.
Page 130 of 158
Configuring Device