Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for D-Link DAP-1360U
Summary of Contents for D-Link DAP-1360U
- Page 1 Quick Installation Guide DAP-1360U Wireless N300 Access Point & Router...
-
Page 2: Before You Begin
If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product. -
Page 3: System Requirements And Equipment
DAP-1360U Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the access point: • ◦ Apple Safari 8 and later ◦ Google Chrome 48 and later ◦... -
Page 4: Pc With Ethernet Adapter
DAP-1360U Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the access point and the Ethernet port of your PC. 2. Connect the power cord to the power connector port on the back panel of the access point, then plug the power adapter into an electrical outlet or power strip. - Page 5 DAP-1360U Quick Installation Guide Configuring IP Address in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
- Page 6 Click the OK button. 7. Click the OK button in the connection properties window. Now you can connect to the web-based interface of DAP-1360U for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
-
Page 7: Pc With Wi-Fi Adapter
DAP-1360U Quick Installation Guide PC with Wi-Fi Adapter 1. Attach the antennas from the delivery package. To do this, remove the antennas from their wrapper, attach them to the relevant connectors on the back panel of the access point, and then screw the antennas in a clockwise direction to the back panel. -
Page 8: Configuring Wi-Fi Adapter In Os Windows 7
DAP-1360U Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by... - Page 9 DAP-1360U Quick Installation Guide 6. Select the Use the following IP address radio button and enter the value 192.168.0.51 in the IP address field. The Subnet mask field will be filled in automatically. Click the OK button. 7. Click the OK button in the connection properties window.
- Page 10 11. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale. Now you can connect to the web-based interface of DAP-1360U for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
-
Page 11: Connecting To Web-Based Interface
DAP-1360U Quick Installation Guide CONFIGURING ACCESS POINT Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the domain name of the access point (by default, dlinkap.local) with a dot at the end and press the Enter key. - Page 12 DAP-1360U Quick Installation Guide If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
- Page 13 DAP-1360U Quick Installation Guide The Summary page displays general information on the access point and its software. The web-based interface of the access point is bilingual (English/Russian). You can select the needed language upon the initial configuration of the web- based interface of the access point or in the System / Configuration section of the menu.
-
Page 14: Initial Configuration Wizard
DAP-1360U Quick Installation Guide Initial Configuration Wizard In order to start the Initial Configuration Wizard manually, go to the Initial Configuration section. Click the OK button and wait until the factory default settings are restored. If you perform initial configuration of the access point via Wi-Fi connection,... - Page 15 DAP-1360U Quick Installation Guide 1. Click YES in order to leave the current language of the web-based interface or click NO to select the other language. 2. On the next page, click the CONTINUE button.
-
Page 16: Selecting Connection Method
DAP-1360U Quick Installation Guide Selecting Connection Method In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Wired connection value. Then from the Work mode list select the Access point value. - Page 17 DAP-1360U Quick Installation Guide Also you can enable the WDS function via the Initial Configuration Wizard. To do this, on the Device mode page, from the Connection method list, select the Wi-Fi value. Then from the Work mode list select the WDS value.
- Page 18 DAP-1360U Quick Installation Guide Configuring WDS Function This configuration step is available for the WDS mode. 1. On the WDS page, in the WDS Mode list, select the WDS function mode. 2. In the WDS Encrytion list, select a type of encryption for data transfer between access points interconnected via the WDS function.
- Page 19 DAP-1360U Quick Installation Guide 4. In the AP MAC field, specify the MAC address of a device connected to the access point via the WDS function. To specify several MAC addresses, click the ADD button, and in the line displayed, enter a MAC address.
-
Page 20: Changing Lan Ipv4 Address
If you want to manually assign the LAN IPv4 address for DAP-1360U, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Netmask, Hostname fields and, if needed, the Gateway IP address field. - Page 21 DAP-1360U Quick Installation Guide Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
-
Page 22: Configuring Wan Connection
DAP-1360U Quick Installation Guide Configuring WAN Connection This configuration step is available for the Router and WISP Repeater modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection. - Page 23 DAP-1360U Quick Installation Guide PPPoE, PPPoE + Dynamic IP (PPPoE Dual Access): Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 24 DAP-1360U Quick Installation Guide PPTP + Dynamic IP or L2TP + Dynamic IP: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
- Page 25 DAP-1360U Quick Installation Guide 2. If your ISP uses MAC address binding, select the Clone MAC address of your device checkbox. 3. If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and fill in the VLAN ID field.
-
Page 26: Configuring Wireless Network
DAP-1360U Quick Installation Guide Configuring Wireless Network This configuration step is available for the Router, Access point, WISP Repeater, Repeater, and WDS modes. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network or leave the value suggested by the access point. - Page 27 DAP-1360U Quick Installation Guide 5. If you want to create an additional wireless network isolated from your LAN, select the Enable guest network checkbox (available for the Router and WISP Repeater modes only). 6. In the Network name field, specify your own name for the guest wireless network or leave the value suggested by the access point.
-
Page 28: Configuring Lan Ports For Iptv/Voip
DAP-1360U Quick Installation Guide Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router and WISP Repeater modes. 1. On the IPTV page, select the Is an STB connected to the device checkbox. 2. Select a free LAN port for connecting your set-top box. - Page 29 DAP-1360U Quick Installation Guide 5. On the VoIP page, select the Is an IP phone connected to the device checkbox. 6. Select a free LAN port for connecting your IP phone. 7. If the VoIP service is provided via a VLAN channel, select the Use VLAN ID checkbox and fill in the VLAN ID field.
-
Page 30: Changing Web-Based Interface Password
DAP-1360U Quick Installation Guide Changing Web-based Interface Password On this page you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields. You may set any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other characters available in the US keyboard layout. -
Page 31: Configuring Local Area Network
DAP-1360U Quick Installation Guide Configuring Local Area Network Go to the Connections Setup / LAN page. If needed, change the IPv4 address of the access point's LAN interface and the mask of the local subnet. To do this, specify needed values in the IP address and Mask fields in the Local IP Address section. -
Page 32: Specifications
DAP-1360U Quick Installation Guide SPECIFICATIONS Hardware · Processor RTL8196D (620MHz) · 32MB, SDRAM · Flash 4MB, SPI · 10/100BASE-TX WAN port Interfaces · 4 10/100BASE-TX LAN ports · POWER LEDs · WLAN · · INTERNET · 4 LAN LEDS ·... - Page 33 DAP-1360U Quick Installation Guide Software · PPPoE WAN connection types · Static IPv4 / Dynamic IPv4 · PPPoE + Static IP (PPPoE Dual Access) · PPPoE + Dynamic IP (PPPoE Dual Access) · PPTP/L2TP · PPTP/L2TP + Static IP ·...
- Page 34 Local and remote access to settings through Management TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface for configuration and management (Russian/English) · Support of D-Link Assistant application for Android and iPhone smartphones · Firmware update via web-based interface · Automatic notification on new firmware version ·...
- Page 35 DAP-1360U Quick Installation Guide Wireless Module Parameters · 802.11b (typical at room temperature 25 °C) Transmitter output power 15dBm (+/-1.5dB) at 1, 2, 5.5, 11Mbps · 802.11g (typical at room temperature 25 °C) The maximum value of the 15dBm (+/-1.5dB) at 6, 9, 12, 18, 24, 36, 48, 54Mbps...
- Page 36 DAP-1360U Quick Installation Guide Wireless Module Parameters HT40 -79dBm at MCS0/8 -76dBm at MCS1/9 -74dBm at MCS2/10 -71dBm at MCS3/11 -67dBm at MCS4/12 -63dBm at MCS5/13 -62dBm at MCS6/14 -61dBm at MCS7/15 Modulation schemes · 802.11b: DQPSK, DBPSK, DSSS, CCK ·...
-
Page 37: Safety Rules And Conditions
DAP-1360U Quick Installation Guide SAFETY RULES AND CONDITIONS Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents. -
Page 38: Technical Support
Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.