Virtual Server - D-Link DWR-922 User Manual

Section 4 - Configuration
The device can be configured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router.
You can also allow the settings to run on a specified schedule.
Well-known This contains a list of pre-defined services. You can select a service,
select a rule ID, then click the Copy to button to copy the default
Services:
settings for that service to the specified rule ID.
ID: Specifies which rule to copy the selected Well known service
settings to when you click the Copy to button.
Use schedule
Select a schedule to use and copy to the specified rule ID when
rule: you click the Copy to button. You may select Always On or use
a specific schedule that you have defined. To create and edit
schedules, please refer to Schedules on page 60.
VIRTUAL SERVERS LIST
ID: This identifies the rule.
Service Ports Enter the public port(s) you want to open.
Server IP: Port: Enter the IP address and port of the computer on your local
network that you want to forward the Service Ports to.
Enable: Check the box to enable the specified rule.
Schedule Rule #: Specify the schedule rule number. To create schedules, click on
the Add New Rule button. For further information on schedules,
please refer to Schedules on page 60.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-922 User Manual

Virtual Server

39