Virtual Server Settings Wizard - D-Link DSL-2640U User Manual

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

Virtual Server Settings Wizard

To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the
LAN, click the Virtual server settings wizard link in the Home section.
On the opened page, you can specify the following parameters:
Parameter
Template
Name
Interface
Protocol
Public port (begin)/
Public port (end)
Figure 42. The page for adding a virtual server.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
Enter a name for the virtual server for easier identification. You can
specify any name.
Select a WAN connection to which this virtual server will be
assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
A port of the router from which traffic is directed to the IP address
specified in the Private IP field. Specify the start and the end value
for the port range. If you need to specify one port, enter the needed
value in the Public port (begin) field and leave the Public port
(end) field blank.
Page 56 of 146
Configuring via Web-based Interface
Description