Installing Optional Rear Door Kit; Leveling The Library - Overland Storage NEO 8000E User Manual

NEO 8000e User Guide

Installing Optional Rear Door Kit

If the optional rear door was purchased with the library, follow the instructions that
came with the door to install it at this time.

Leveling the Library

You are now ready to move the unit into its final position and level it.
CAUTION:
while moving the library.
1. Position the library at its operating location.
2. Run down all four leveling legs by hand until they contact the floor.
3. Using the 10" adjustable wrench, turn each leveling leg, one after the other in
equal increments, until you have turned them at least one full turn.
NOTE: Be sure the library has been raised high enough so none of the casters touch the
4. Place a level, front to rear, on the top side edge of the library
10400293-001 08/2010
Figure 2-7: Attaching the Doors
To prevent damage, do not pull on the media drawer handles at any time
floor.
©2005-10 Overland Storage, Inc.
Unpacking and Setting Up
(Figure 2-8).
2-6