MSA G1 SCBA Operating Manual page 83

Niosh cbrn/nfpa 2018 edition

Hide thumbs Also See for G1 SCBA:

Table of Contents

(4)

Push one end of the wire frame up into the facepiece so the

frame is in position along the edge where the lens and face-

blank meet.

(5)

Make sure the end of the wire frame is in position in the

small pockets in the faceblank on the edge of the lens.

(6)

Do Steps (4) and (5) on the opposite side.

(7)

Don the facepiece.

(8)

Adjust the lens frame up/down and in/out to optimize fit and

visibility.

G1 SCBA 2018 Edition

Spectacle Kit

Table of Contents