After Doffing - MSA G1 SCBA Operating Manual

Niosh cbrn/nfpa 2018 edition

Hide thumbs Also See for G1 SCBA:

Table of Contents

10.3 After Doffing

(1)

Do the procedures in Section 12.4 "Changing the Cylinder" to replace the cylinder with one that

is fully charged.

(2)

Do the cleaning and disinfecting procedures in Section 11 "Cleaning and Disinfecting the SCBA".

(3)

Do the inspection procedures in Section 4 "Visual Inspections".

(4)

Make sure the complete SCBA is clean and dry.

(5)

Make sure the head harness straps for the facepiece and the harness adjustment straps are fully

extended.

(6)

Put the complete SCBA in the storage case or an approved storage location for easy access

during emergency conditions. Refer to Section 19 "Safekeeping and Storage".

(3)

Grip the front of the facepiece (as shown) and pull the

facepiece away and down from the user.

G1 SCBA 2018 Edition

After Use

Table of Contents