Edging Default; Hole Editor Default - Huvitz Excelon XD Operator's Manual

Excelon XD Operator's Manual
76
Frame Change Margin – Margin value for frame change lens
Use Small Lens Adaptor – Show warning message when small lens adaptor
needed

6.1.3 Edging Default

• Lens Material
Select default lens material (Plastic, Polycarbonate, HI-Index, Glass,
Trivex® )
• Use Fragile Mode
Select default safety mode (Fragile mode, Normal mode)
• Default Edging Type
Select default edging type
• Beveling Default Option
Set default options for bevel edging
• Flat/Grooving Default Option
Set default options for rimless edging

6.1.4 Hole Editor Default

• X Pos Reference/ Y Pos Reference
Select default hole position coordinates reference
X (Horizontal) – frame center / temporal box / nasal box
Y (Vertical) – frame center / Top box / Bottom Box
• Tilting Angle Mode
Set default titling mode (auto, manual)
• Tilting Ref Surface
Select default tilting reference surface (front, back)
• Default Value (Depth, Diameter, tilting angle)
Set default values
• Confirm Hole Delete