Huvitz Excelon XD Operator's Manual page 12

Excelon XD Operator's Manual
12
water splashes, dripping water, or sprayed water. Do not place containers
containing fluids, liquids, or gases on top of any electrical equipment or devices.
(3) The equipment must be operated only by, or under direct supervision of a
properly trained and qualified person.
(4) The service technician of Huvitz or the technician authorized by Huvitz may only
carry out modifications of this equipment.
(5) Customer maintenance of this equipment may only be performed as stated in
the User‟s Manual and Service Manual. Any additional maintenance may only
be performed by the service technician of Huvitz or the technician authorized by
Huvitz.
(6) The manufacturer is only responsible for effects on safety, reliability, and
performance of this equipment when the following requirements are fulfilled: (1)
The electrical installation in the respective room corresponds to the
specifications stated in this manual and (2) This equipment is used, operated,
and maintained according to this manual and Service Manual.
(7) The manufacturer is not liable for damage caused by unauthorized tampering
with the device(s). Such tampering will forfeit any right to claim under warranty.
(8) This equipment may only be used together with accessories supplied by Huvitz.
If the customer makes use of other accessories, use them only if their safe
usability under technical aspect has been proved and confirmed by Huvitz or the
manufacturer of the accessory.
(9) Only person who has undergone proper training and instructions are authorized
to install, use, operate, and maintain this equipment.
(10) Keep the User‟s Manual and Service Manual in a place easily accessible at all
times for persons operating and maintaining the equipment.
(11) Do not force cable connections. If a cable does not connect easily, be sure that
the connector (plug) is appropriate for the receptacle (socket). If you cause any
damage to a cable connector(s) or receptacle(s), let the damage(s) be repaired
by an authorized service technician.
(12) Please do not pull on any cable. Always hold on to the plug when disconnecting
cables.
(13) Before every operation, visually check the equipment for exterior mechanical
damage(s) and for proper function.