System Adjustment - Huvitz Excelon XD Operator's Manual

Excelon XD Operator's Manual
90
Set lens rotation speed for each edging step and each material.
• Roughing Y Speed
Set fall speed of lens when roughing edging started.
• These values are closely related to the quality of the edged lens so keep the
factory default values.
• Too high "Rotation Speed" values cause axis distortion during edging.

6.3.9 System Adjustment

• Polish Wheel Size
Enter compensation value for polishing wheel size.
• Max Rimless Thickness
Set maximum lens thickness for rimless edging.
• Wheel for HI
Select the roughing edging wheel for HI-Index lens.
• Feeling Outside of Bevel
Enable or disable feeling outside of bevel.
• Bevel Height
Set bevel height value for "Feeling Outside of Bevel" function.
• PC, TRI Edging Order
Change the edging order of PC/TRI lens.
• Swap Pump 1,2
OFF – Used as it is
ON – Swap the function of Pump 1 and Pump 2.
(Swap pump could be used when Pump 1 is out of order, Temporarily, you
can use Pump 2 instead of Pump 1)
!
CAUTION