Husqvarna R 318X Workshop Manual page 63

3. Loosen the belt tensioner (A).
B
4. Release the equipment belt (B).
5. Pull the main belt off the intermediate pulley. The
tension of the main belt loosens when the cutting
deck is in the servicing position.
6. Remove the equipment belt from the intermediate
pulley.
9.9.7 To install the equipment belt
1. Install the equipment belt from the front of the
product.
2. Put the equipment belt in the bottom groove of the
intermediate pulley.
3. Put the cutting deck in mow position. Refer to
the cutting deck in mow position on page 52 .
855 - 002 - 28.03.2019
A
To put
Repair instructions - 63