Husqvarna R 318X Workshop Manual page 39

6. Connect the fuel sensor connector (B).
7. Fill the tank with fuel and do a check that there are
no leaks.
8. Install the covers.
9.4.3 To replace the fuel filter
1. Open the engine cover to get access to the fuel
filter.
2. Move the hose clips away from the fuel filter with a
pair of flat pliers.
3. Pull off the fuel filter from the hose ends. A small
quantity of fuel can leak.
4. Push the new fuel filter into the ends of the hoses.
Apply liquid detergent to the ends of the fuel filter to
make the connection easier.
5. Push the hose clips against the fuel filter.
855 - 002 - 28.03.2019 Repair instructions - 39