SMC Networks EX510-GPR1 Series Operation Manual page 48

Specifications
■Specifications
Model No.
Output type
Rated load voltage
Power supply type
Power supply connector
acceptable electric wire
Output point
Output connector type
Acceptable electric wire
Max. load current
Enclosure
Current consumption
Weight
•Applicable manifold valve series
The Output unit can drive the 2-port valve of VX, VCW, VDW series, etc.
Refer to the catalogs and Operation Manual of each valve series for detail of the solenoid valve and
manifold, etc.
■Dimensions
EX510-DYN3
NPN
Internal power supply (from GW unit)
-
Meet the three following conditions:
(1) 1 point: 0.5 A or less
(2) 1 unit: 1 A or less
(3) Total current of OUT0 to 7: 1 A or less
Total current of OUT8 to 15: 1 A or less
EX510-DYP3 EX510-DYN4
PNP
24 VDC
(from power supply connector)
0.14 to 1.5 mm
16
Cage clamp type
2
0.08 to 1.5 mm (AWG16 to 28)
Meet the three following conditions:
(1) 1 point: 0.5 A or less
(2) 1 unit: 3 A or less
(3) Total current of OUT0 to 7: 1.5 A or less
Total current of OUT8 to 15: 1.5 A or less
Short circuit installed
50 mA or less (Internal unit)
130 g (Include accessories)
-47-
EX510-DYP4
NPN PNP
External power supply
2
(AWG16 to 26)
No.EX##-OMI0032-C