Summary of Product Parts
No.
Element
Branch connector on the Output
1
unit side
2
Output terminal block
3
Power supply LED
4
Communication LED
5
Display LED
6
Fuse
7
Mounting slot
8
Mounting hole
9
Cover
Terminal block for auxiliary
10
power supply
Output unit
Used to crimp branch connector (
connected them to GW unit.
Used to connect output load, etc.
Lights up: Power ON (normal)
Goes off: Power OFF
Lights up: Receiving data
Goes off: No communication data
Lights up: Output signal ON
Goes off: Output signal OFF
Fuse is replaceable.
Used to mount DIN rail on the unit.
The unit is mounted by two M4 screws.
Used to protect cable and provided with marker plate (
Used to supply power for the loads.
(EX510-DYN4, EX510-DYP4)
-42-
Description
) into branch cable (EX510-FC
) on the top.
No.EX##-OMI0032-C
) and