Specifications - SMC Networks EX510-GPR1 Series Operation Manual

Specifications

■Specifications
•Basic specifications
Rated voltage
Power supply voltage
Rated current
Input/Output point
Weight
•Higher-level bus
Protocol
Bus interface
Freeze function
Synchronous function
Address setting range
ID No.
Device data file
∗: This file is necessary for automatic device setting.
•Lower-level bus
Number of branches for input/output
Communication type
Current for input branch
Current for output branch
Branch cable length
∗: Maximum value in total of current consumption and load current of connected input equipments.
•Transmission speed
PROFIBUS DP communication line uses a twist pair cable with a shield. The maximum cable length is
determined by transmission speed. Also, the specifications of the cable length is based on type A cable.
•Network length
Communication speed [kbps]
Max. cable length [m]
Communication speed [kbps]
Max. cable length [m]
∗: Maximum cable length differs depending on the specifications of a cable.
The above cable length is based on type A cable.
•Cable specification
Impedance
Capacitance between conductors
Conductor resistance
Cable diameter
Conductor area
24 VDC
Power supply for input and controlling: 24 VDC±10%
Power supply for output: 24 VDC+10%/-5%
(Warning for voltage drop is given at approx. 20 V)
Power supply for input and controlling: Max. 4.1 A
Inside GW unit: 0.1 A
Input unit: 4 A
Power supply for output: Max. 6 A
Input point: Max. 64/Output point: Max. 64 (Changeable by switch settings)
160 g (including accessories)
PROFIBUS DP V0
EIA RS-485
Available
Available
0 to 125
140d HEX
GSD file
4 branches for input, 4 branches for output
Communication protocol: dedicated for SMC
Communication speed: 750 kbps
∗
Max .1 A per branch
Max. 1.5 A per branch
Within 20 m (See diagram below for details.)
9.6
∗
500
∗
400
135 to 165 Ω
30 pF/m or less
110 Ω/km or less
0.64 mm or more
2
0.34 mm
∗
19.2 45.45 93.75
1200
1500 3000 6000
200 100
or more
-31-
187.5
1000
12000
No.EX##-OMI0032-C