SMC Networks EX510-GPR1 Series Operation Manual page 14

Summary of Product Parts
No. Element
1 Communication socket (BUS)
2 Power supply socket (PWR(V))
3 Power supply socket (PWR)
GW unit side branch connector
4
(for input)
GW unit side branch connector
5
(for output)
6 Ground terminal (FG)
7 Mounting hole
8 DIN rail mounting slot
9 Display/switch setting part
EX510 GW unit
Connect to PROFIBUS DP line with a communication connector for
PROFIBUS DP ( ). Connect a terminating resistor (
a transmission route.
Supplying power for output devices such as a solenoid valve with a power
supply connector ( ).
Supplying power for controlling GW and for input devices such as a sensor
with a power supply connector (
Connecting an Input unit etc. by using branch cables (EX510-FC
Connecting an SI unit (manifold valve) etc. by using branch cables
(EX510-FC ).
Used for grounding.
Used when an unit is mounted with two M4 screws.
Used when an unit is mounted to DIN rail.
Sets up the switch on such as LED display and address, I/O points.
-13-
Description
) to both end units of
).
).
No.EX##-OMI0032-C