SMC Networks EX510-GPR1 Series Operation Manual page 41

Setting
•Setting of display
Specifications
■Specifications
•SI unit specifications
Item
Model No.
Output type
Number of output points
Rated load voltage
Max. load current
Protection
Current consumption
Weight
•Applicable solenoid valve series
The following manifold valve can be used for EX510 series.
•Non-plug in type
Valve series
SY 3000, 5000, 7000, 9000
SYJ 3000, 5000, 7000
S0700 0700
VQZ 1000, 2000, 3000
•Plug-in type
Valve series
SJ 2000, 3000
SZ 3000
SY 3000, 5000
SQ 1000, 2000
VQ 1000, 2000
Refer to the catalogs and Operation Manual of each valve series for solenoid valve and manifold, etc.
Display
Lights up: The power for output is supplied at specified
Power supply LED
Goes off: The power for output is not supplied at specified
Communication Lights up: Data is being received from a GW unit
LED Goes off: No data is being received.
EX510-S001 , EX510-S002
NPN output (Sink type)
Meet the three following conditions:
(1) 1 point: 0.25 A or less
(2) 1 unit: 1.4 A or less
(3) Total current of OUT0 to OUT7: 1 A or less,
Total current of OUT8 to OUT15: 1 A or less
Built-in protection circuit for short circuit
50 mA or less (inside of SI unit)
EX510-S 01: 40 g/EX510-S
EX510-S 02A, B, C: 90 g (including accessories)
Model No.
Model No.
-40-
Contents
voltage.
voltage.
Specification
EX510-S101 , EX510-S102
PNP output (source type)
16 points
24 VDC
01A, B: 80 g/EX510-S 02: 50 g
No.EX##-OMI0032-C