•Set-up steps of EX510-GPR1 Hold/Clear
(1)Double-click
"EX510 icon" on the STEP7 screen, and "Properties" window is displayed.
(2)Click
"Parameter Assignment" tab. In the
"By DIP SW" to "By Parameter".
(3)Click
"OK".
PLC software "STEP7" manufactured by Siemens AG is shown above. "STEP7" is a registered
trademark of Siemens AG.
"Hold/Clear Setting" parameter, change the value from
①
②
③
⑤
-29-
④
No.EX##-OMI0032-C