SMC Networks EX510-GPR1 Series Operation Manual page 35

No. Element
1 Branch connector on the SI unit side
2 Load mounting connector
3 Power supply LED
4 Communication LED
5 Mounting hole
6 Connector locking pin inserted hole
7 Mounting bracket
8 Adapter cable assembly
∗: Only mounting direction of the SI unit to the mounting bracket is different between EX510-S A and EX510-S B. Mounting
direction can be changed from horizontal to vertical by changing the screws which construct the mounting bracket. Mounting direction
of the EX510-S 02C cannot be changed to vertical as the its mounting bracket is exclusive for horizontal mounting.
Used to crimp branch connector (
and connected them to GW unit.
Connecting output equipment such as solenoid valve.
Lights up: Power ON (Normal)
Goes off: Power OFF
Lights up: Data received
Goes off: No data received
Used to mount the unit with two M3 screws.
Receiving connector locking pin (
Possible to mount on DIN rail.
Connects a plug-in valve manifold. (Only for EX510-S
-34-
Description
) into branch cable (EX510-FC
).
02
No.EX##-OMI0032-C
)
)