2. Power supply wiring
Connect power supply wiring to the two power supply 2-pin connectors. Power supply consists of
2 systems, but they it can be used with both of single power supply and separate power supplies.
Also, other units do not need individual power supply. Make sure of connection with the designated pin.
Tighten the connector securely to 0.5 to 0.6 Nm tightening torque. Refer to Fig. 4 about how to connecting.
When SI unit etc. (EX510-S 0 ) is used besides the external power supply type Output unit, it is
necessary to supply power for output to the GW unit and the Output unit.
NOTE
Ground the FG terminal.
-17-
No.EX##-OMI0032-C