BainUltra THERMOMASSEUR Owner's Manual page 63

DRILLING TEMPLATES | OWNER'S MANUAL
DRAWING OF AROMACLOUD HOLE
IMPORTANT
Drawing is to scale.
RECOMMENDED STEPS
• Choose a position for Aroma-
Cloud on the bath.
• Place the adhesive masking
paper over the area of the bath
where AromaCloud will be
installed, to protect the acrylic.
• Drill the 4 holes on the tem-
plate, using a ¼ inch drill bit.
• Complete the rectangular
cutout using a jigsaw equipped
with a fine-tooth metal blade.
Note : Non-factory installation
requires special care (read
the warranty carefully).
When choosing the position of
AromaCloud on the bath, consider
the following points:
• The Bainultra recommended
position
• The position of controls
• The position of faucets
• The position of tiling flange
if present
• The desired direction with respect
to the bath and the room entrance
Notes:
- AromaCloud must be installed
on bath decking.
- After drilling, verify that there
is a 1/16 inch gap between the
hole and the AromaCloud housing.
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
AROMACLOUD
®
DRILLING TEMPLATES
63