SKIRTS INSTALLATION | OWNER'S MANUAL
2. INSTALLATION (CONT'D)
2-10
Insert top of panel between the bath
rim and retainer clips. Position base of
panel against toe kick.
2-11
Seat brackets on toe kick and adjust
screws so that brackets are vertical.
2-12
Adjust panel height, leaving 1/4"(0.6
cm) between the edge of the bath and
the curved panel top.
2-13
Ensure brackets are well seated on toe
kick and tighten wing nut as much as
possible.
2-14
Remove panel and follow steps 2-10 to
2-13 for the left panel.
2-15
Remove left panel and repeat steps
2-10 to 2-13 with the center panel.
2-16
Leave center panel in place and rein-
stall the left and right panels, inserting
top of panel first.
NOTE: Cut left and right toe
kicks and panels as needed.
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
2-10
2-11
2-12
SJ-3 SE
33