Mia User Guide - BainUltra THERMOMASSEUR Owner's Manual

MIA
®
USER GUIDE
ON/OFF
On
Press the (on/off) key
the turbine and the Mia® control panel.
ADJUST AIR JET PRESSURE
Air jet pressure can be adjusted for maximum
comfort and a remarkably effective massage.
Default pressure is set to 60%.
Increase or decrease the pressure of the air
jets by repeatedly pressing the
until the desired intensity is reached.
TO ACTIVATE THE DRYING CYCLE
This function completely drains the conduits
and dries them for 90 seconds, regardless of
whether or not the system was activated. By
eliminating any water left in the conduits, the
Drying cycle ensures perfect hygiene.
• No stagnant water
• No water left over from the previous bath
To activate the Drying cycle, press
The operation will cease after 90 seconds.
If you do not activate the function, the dry-
ing process will begin automatically after 15
minutes. If the bath is used for soaking only,
activate the drying cycle manually by press-
ing . You can use the Drying cycle function
immediately after a Hydro-thermo massage
session or whenever you wish.
NOTE • The heat for the heated backrest is controlled simultaneously with the intensity
of the jet pressure.
40
to start or to stop
or keys
.
®
1 800 463.2187
OWNER'S MANUAL | THE MIA
MAIN FUNCTIONS
• Increase or decrease air jet pressure
• Activate Drying cycle function
Monday to Thursday from 8 a.m. to 6 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST)
Printed in Canada. Copyright © June 2020 BainUltra Inc. All rights reserved. 45200001
& MIA PLUS CONTROLS
® ®