Skirts Installation; General Instructions - BainUltra THERMOMASSEUR Owner's Manual

SKIRTS INSTALLATION | OWNER'S MANUAL
SIZING ACRYLIC PARTS
Depending on wall finish, you may need to size
the panels and toe kicks. When installation
instructions of specific skirt model mention siz-
ing of acrylic parts, if such sizing is necessary,
follow these steps.
PEEL COAT
A plastic film ("peel coat") protects the acrylic
parts. It is best to leave this film in place while
working. Only remove it just before installing
the parts. If you remove the peel coat when
work starts, you risk scratching the parts during
installation. If you remove the peel coat only
after all parts are installed, some plastic may
stay trapped in certain areas.
1. SIZING ACRYLIC
1-1 Protect the acrylic with tape.
1-2 Trace the cutting line.
1-3 Cut using a jigsaw with a melamine
blade or a metal blade (minimum 14
teeth/inch).
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.

SKIRTS INSTALLATION

Instructions specific to each skirt model are
presented on the following pages. These general instruc-
tions apply to all models.
Before starting, make sure all parts match your order. Con-
tact BainUltra at 1-800-463-2187
if you have any questions.
Ensure that the ThermoMasseur
installed in accordance with BainUltra installation
instructions and the bath bottom is flush with
the floor.
1-1

GENERAL INSTRUCTIONS

has been
®
1-2
1-3
27