BainUltra THERMOMASSEUR Owner's Manual page 25

TURBINE ELECTRICAL INSTALLATION | OWNER'S MANUAL
IMPORTANT
A. TO REMOVE TURBINE AND GEYSAIR
FROM ITS CURRENT SUPPORT
A-1 Disconnect electrical supply to bath.
A-2 Disconnect wires going to turbine.
A-3 Using a flathead screwdriver, loosen
fitting.
A-4 Unplug the electrical cable connecting
the turbine to the Geysair unit.
B. TO REINSTALL TURBINE REMOTELY
B-1 Mount turbine to wall or wall structure
by inserting 1" (2.5 cm) screws in
mounting holes.
B-2 Use as many 1 1/2" (4 cm) ABS or PVC
pipes as necessary to connect turbine
to bath. Follow all relocation instruc-
tions provided at p. 24 of the present
Owner's Manual. To reduce vibrations,
avoid having air line pipes touch home
structure.
B-3 Secure pipe at air output of turbine by
drilling a 1/8" (0.3 cm) hole and by using
1/2" (1.3 cm) sc rew. (Do not glue).
B-4 Add an electrical cable extension
specific to Geysair (available at
BainUltra) between the Geysair cable
and the turbine cable. WARNING: Test
for grounding continuity between the
bath grounding terminal
power supply. Failure to perform the
grounding continuity test could result
in serious personal injury.
B-5 Reconnect wires going to turbine.
B-6 Connect bathtub's power supply.
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
THESE STEPS MUST BE EXECUTED BY A QUALIFIED ELECTRICIAN
•
• GEYSAIR SHOULD NOT BE INSTALLED REMOTELY
and bath
TURBINE
REMOTE MOUNTING INSTALLATION
A-4
25