Table of Contents
Advertisement
TURBINE WITH GEYSAIR
MOTOR
Weight 6,2 lbs
Motor power
Panasonic 0,8 HP
120 V | 540 W | 4,5 A
Air pressure 2,75 psi
Air flow 75 cfm at maximum speed
Motor rotation speed
27 000 rpm at maximum speed
Noise level
56 to 60 db at maximum speed
Operating cost
$0.027/HR for $0.045/KWh
AIR HEATER
Power
700 W | 5,8 A
Operating cost
$0.027/HR for $0.045/KWh
GEYSAIR
Power
700 W | 5,8 A
Hot Water Consumption
0,13 GPM*
* If using a tankless water heater, insure
minimum water flow activation is adequate.
Operating cost
$0,032/HR for $0,045/KWh
NOTES
• The specifications shown indicate the outer edge dimension.
• The manufacturer accepts a 1/4" [ 0.64 cm] variance. There are variations on each product and
specifications are subject to change as we improve upon our product as required. The dimen-
sions needed for site preparation and structure building will differ. BainUltra ® assumes no
responsibility for preparatory work done prior to the product being on site.
WARRANTY
Turbine* |
20
OWNER'S MANUAL | TURBINE ELECTRICAL INSTALLATION
TECHNICAL SPECIFICATIONS
Flow Controller
(Filter Inside)
Hot Water
Intake
AIR INTAKE
29-1/2''
[75 cm]
(OPTIONAL SUPPORT INCLUDED)
FOR REMOTE MOUNTING ONLY
Geysair * | *Some restrictions may apply. (www.bainultra.com/warranty)
1 800 463.2187
Monday to Thursday from 8 a.m. to 6 p.m. (EST) . Friday from 8 a.m. to 5 p.m. (EST)
Printed in Canada. Copyright © June 2020 BainUltra Inc. All rights reserved. 45200001
Turbine Female
Connector
Geysair Male
Connector
4-3/4"
[12,1 cm]
3-1/4"
Air
[8,3 cm]
Intake
72" [272,5 cm] Hose
connected to Hot Water Supply
AIR INTAKE
29-1/2''
[75 cm]
(OPTIONAL SUPPORT INCLUDED)
FOR REMOTE MOUNTING ONLY
10''
[25,4 cm]
1-1/2''
1-1/2''
[3,8 cm]
[4 cm]
n 6-3/4''
[17,2 cm]
8-1/4''
[21,1 cm]
6-1/2''
[16,5 cm]
Ground Wire
for the Bathtub
Air
Outlet
7-3/4"
[19,7 cm]
10''
[25,4 cm]
1-1/2''
[3,8 cm]
AIR OUTLET
PIPE n1-1/2''
6-1/2''
[16,5 cm]
A
P
1-1/2''
[4 cm]
n 6-3/4''
[17,2 cm]
8-1/4''
[21,1 cm]
Hide quick links:
Advertisement
Table of Contents
