Direct Wall Mounting - Uniden EXAI 918 Operating Manual

3. Plug one end of the
short telephone
cord into the
TEL LINE jack on the
Base Unit.
4. Place the telephone
cord inside the
molded channel on
the bottom of the
Base Unit. Then
plug the other end
of the telephone
cord into the
modular jack on the
wall.
5. Place the Base Unit
on the posts of the
wall plate and push
down until it's
firmly seated.
6. Plug the AC
Adapter into a
standard 120V AC
wall outlet.
Note: Do not use
an outlet controlled
by a wall switch.
EXAI918

Direct Wall Mounting

If you do not have a standard wall plate, you can
mount your phone directly on a wall. Before
mounting your phone, consider the following:
Select a location away from electrical cables,
pipes, or other items behind the mounting
location that could cause a hazard when
inserting screws into the wall.
Make sure the wall material is capable of
supporting the weight of the Base Unit and
Handset.
Use the screws supplied with anchoring
devices suitable for the wall material where the
Base Unit will be placed.
1. Insert two mounting
screws 3 inches
apart. Allow about
of an inch
between the wall
and screw heads
for mounting the
phone.
2. Plug the AC
Adapter into the
Base Unit.
3. Place the AC
Adapter cord inside
the molded
channel.
11