Redialing The Last Number Called; Using The Flash Key With Call Waiting; Using The Speakerphone - Uniden EXAI 918 Operating Manual

900 mhz cordless telephone with an integrated digital answering system
Hide thumbs Also See for EXAI 918:
Table of Contents

Advertisement

If the name of the
person calling is
unknown, the LCD
displays:

Using the Speakerphone

To use the
speakerphone to
answer a call, press
speaker on the Base
Unit. Direct your voice
to the microphone on
the bottom of the Base
Unit. To hang up, press
speaker again.
Note: Adjust the speakerphone volume by
pressing L for louder or M for softer.
Answering a Call with AutoTalk
Enabled
If you have enabled the AutoTalk feature, just
remove the Handset from the Base Unit to answer
an incoming call. See "Setting the AutoTalk
Feature" on page 18 for details on setting
AutoTalk.
If the Handset is off the Base Unit, press any key
to answer an incoming call.
Answering a Call without AutoTalk
Enabled
When the phone
rings, pick up the
Handset and press
talk .. The channel
number is displayed
for 2 seconds.
During your
conversation the
LCD displays the
call timer.
When you are finished with the conversation,
press talk to hang up.
— OR —
Place the Handset back on the Base Unit.
20
UKNOWN NAME
PRIVATE NUM.
CH-10
CH-10
CIDCW ON
00:00:01
Redialing the Last Number
Called
1. Remove the Handset from the Base Unit.
2. Press talk .
Note: If the Handset fails to connect with the Base
Unit the Handset beeps and returns to
standby mode.
3. Press redial/pause .
Note: If the last number dialed is longer than 12
digits, the display will scroll to the left until
the last number is shown in the display.
4. During your
conversation the
LCD displays the
call timer.
5. When you have finished with the conversation,
press talk to hang up.
— OR —
Place the Handset back on the Base Unit.
Using the Flash Key with Call
Waiting
Note: You must subscribe to call waiting service
from your local phone company to use
this feature.
1. While talking you
hear the call waiting
signal.
2. Press flash/function to
switch to that call.
3. To switch back to your original call, press
flash/function again.
CH-10
CH-10
CIDCW ON
1234567
CIDCW ON
00:00:01
KATHLEEN ROL
817-858-3333
CIDCW ON
00:00:01
EXAI918

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exai918i

Table of Contents