Direct Wall Mounting
If you do not have a standard wall plate, you can mount your phone directly on a wall. Before
mounting your phone, consider the following:
Select a location away from electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the wall.
Make sure the wall material is capable of supporting the weight of the Base Unit and
Handset.
Use #10 screws with anchoring devices suitable for the wall material where the Base Unit
will be placed.
1.
Insert two mounting screws 3
about
of an inch between the wall and screw
3
16
heads for mounting the phone.
2.
Plug one end of the long telephone cord into the
TEL LINE jack on the Base Unit.
3.
Place the cord inside the molded channel on the
bottom of the Base Unit.
inches apart. Allow
15
16
14
3/16 IN.
3 15/16 IN.
RING VOL
PULSE-TONE
DC IN 9V
OFF-LO-HI
+
-
TEL LINE