Direct Wall Mounting - Uniden DSS7815 Owner's Manual

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before
doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that could
!
cause a hazard when inserting screws into the wall.
Try to mount your phone within 1.5m of a working phone jack to avoid excessive lengths.
!
Make sure the wall material is capable of supporting the weight of the base and handset.
!
Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall
!
material where the base unit will be placed.
1) Insert two mounting screws into the wall
(with their appropriate anchors). 100mm
apart. Allow about 3mm between the wall
and screw heads for mounting the phone.
2) Refer to steps 1 through 7 on page 12 to
mount the telephone.
[13]
3mm
100mm
35mm