Calling A Number Stored In Memory; Editing And Deleting Numbers In Dial Memory - Uniden EXAI 918 Operating Manual

Continue until the
name Bob Jones is
displayed in the
LCD.
7. Press mem .

Calling a Number Stored in Memory

Use this feature to dial a number previously stored
in memory. See Storing a Caller ID memory
number in Dial Memory on page 23 or Entering a
Number in Dial Memory on page 23 for details.
1. Remove the Handset from the Base Unit.
2. Press mem .

Editing and Deleting Numbers in Dial Memory

Use this feature to edit or delete numbers stored in dial memory.
1. Remove the Handset from the Base Unit.
2. Press flash/function .
3. Press 0 .
4. Enter the memory
location to edit or
delete. For
example, to edit or
delete location 05,
press 05 .
— OR —
Use the L and M
keys to scroll to the
memory location.
24
NAME?
Bob Jones
LOCATION?
6 CALLS
LOCATION?
6 CALLS
DIAL MEMORY?
MEM-1 EDIT-0
LOCATION?
6 CALLS
05 Bob Jones
1234567
05 Bob Jones
1234567
8. Enter a memory
location for the
number. For
example, press 05
to assign location
05 to the number.
You hear a
confirmation beep
and "Storing"
displays.
3. Enter the memory
location. For
example, for
memory location
05, press 05 .
Note: If you want to dial a different number stored
in dial memory, use the L and M keys to
scroll through the numbers stored in
memory.
4. Press talk to dial the number.
To delete the entry in dial memory:
Press and hold
chan/delete for two
seconds. A
confirmation tone
sounds and the
memory location is
cleared.
To edit the number entry in dial memory, for
example, to change 4567 to 5941 :
Press mem .
Press chan/delete
four times.
Enter 5941 .
STORING
6 CALLS
05 Bob Jones
1234567
05
No memor y
Bob Jones
1234567
Bob Jones
123
Bob Jones
1235941
EXAI918