Desk Or Tabletop Installation; Wall Installation - Uniden EXAI 918 Operating Manual

Desk or Tabletop Installation

1. Place the Base Unit
on a desk or
tabletop.
2. Plug the AC
Adapter cord into
the 9V DC input
jack on the
Base Unit.
3. Place the AC
Adapter cord
around the
strain relief.
4. Plug one end of the
long telephone cord
into the TEL LINE
jack on the
Base Unit.
10
5. Plug the other end
of the cord into the
telephone jack on
the wall.
6. Plug the AC
Adapter into a
standard 120V AC
wall outlet.
Note: Do not use
an outlet controlled
by a wall switch.

Wall Installation

Standard Wall Plate Mounting
These phones are designed to be mounted on a
standard AT&T or GTE wall plate.
1. Plug the AC
Adapter into the
Base Unit.
2. Place the AC
Adapter cord inside
the molded
channel.
EXAI918