Entering The Local Area Code - Uniden EXAI 918 Operating Manual

Entering the Local Area Code

Note: Please refer to the foldout in front of your
operating guide for key positions.
You must enter your local area code for the Caller
ID redial features to work properly.
To enter your local area code:
1. Remove the Handset from the Base Unit.
2. Press flash/function
twice.
3. Enter your local
area code. For
example, 817.
4. Press mem . A
confirmation tone
sounds and the
display remains on
for two seconds.
5. Place the Handset
on the Base Unit.
The Status LED on
the Base Unit will
blink to indicate that
the area code is
stored.
To delete your local area code:
1. Remove the Handset from the Base Unit.
2. Press flash/function
twice.
3. Press chan/delete
three times.
4. Press mem . A
confirmation tone
sounds and the
display remains on
for two seconds.
EXAI918
AREA CODE
1-
AREA CODE
1-817
STORING
6 CALLS
AREA CODE
1-817
DELETING
1-817
5. Place the Handset
on the Base Unit.
The Status LED on
the Base Unit will
blink to indicate that
the area code is
deleted.
Setting Caller ID on Call Waiting
Note: You must subscribe to Caller ID on Call
Waiting from your local phone service to use
this feature.
You can set your EXAI918 phone to display
information about calls that generate a call waiting
tone while you are on a call.
Note: With this feature set you will not be able to
hear the person you are talking to for a brief
period after you receive the call waiting tone.
To turn Caller ID on Call Waiting on:
1. Remove the Handset from the Base Unit.
2. Press flash/function
three times.
3. Press 1 .
4. Press mem . A
confirmation tone
sounds and the
display remains on
for two seconds.
5. Place the Handset
on the Base Unit.
The Status LED on
the Base Unit will
blink to indicate that
Caller ID on Call
Waiting is on.
CIDCW OFF
ON-1 OFF-0
CIDCW ON
ON-1 OFF-0
CIDCW ON
ON-1 ON-1 OFF-0 OFF-0
17