Direct Wall Mounting - Uniden XS9800 Owner's Manual

Color profile: Disabled
Composite Default screen
Be careful not to insert the
mounting screws into
possible electrical hazards
such as cables, wiring,
or pipes.
6
C:\Manuals 7\Exs9800\EXS9800.vp
Thu Oct 01 08:40:01 1998
8) Flip the retainer from front to back,
then slide it back into the slot so
that the lip of the retainer faces up
and the oval is at the bottom of the
retainer. This will hold the handset
in place.

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
Select a location away from electrical cables, pipes, or other items
behind the mounting location. Inserting screws into areas such as
this can be hazardous.
Try to mount your phone within 10 - 15 feet of a working phone
jack in order to avoid excessive cord lengths. Remember, you are
not mounting to a wall plate with a built in phone jack.
If the selected mounting area has no wooden support beams directly
behind it, you will need the appropriate anchoring devices in order
for the wall to properly support your phone.
1) Insert two mounting screws into
the wall, with their appropriate
anchoring device, 3-15/16 inches
apart. Allow about 3/16 of an inch
between the wall and screw heads
for mounting the phone.