Leaving A Memo Message; Remote Operation - Uniden EXAI 918 Operating Manual

Leaving a Memo Message

You can use the EXAI918 to leave a Memo
Message up to 60 seconds long for someone else
who uses your Answering System.
To record a memo message, follow these steps:
1. Press and hold
memo .
You can operate your EXAI918 while you're away from home by calling from any touch-tone phone.
When using this feature, you cannot change the Time and Day Stamp or your PIN code from a
touch-tone phone.
Using a Touch-Tone Phone
You can operate your Answering System using any
touch-tone telephone. Use this function to check
for recorded messages, play or delete messages,
or even record a new outgoing message.
1. Call your telephone number.
2. During the outgoing
message playback,
#
press followed by
your PIN number.
3. The Answering System announces the Time
Stamp followed by the number of new
messages stored in memory. If you have
messages they are played.
4. You then hear intermittent beeps indicating
that the system is in the Command
Waiting Mode.
Note: You must enter a command within 20
seconds or the Answering System hangs up
and returns to Standby.
EXAI918
2. When the message

Remote Operation

5. Use this chart to select the function you want.
6. When you've finished, hang up to exit the
counter begins to
count up (1,2,...),
speak into the
microphone. When
you finish speaking,
release memo .
There is a tone, the
Message Counter
begins to flash, and
the system returns
to standby.
Function
Repeat
Play Message
Skip
Delete Message
Answer On/Off
Stop
Record OGM/Rec Stop
Play New Message
Review OGM
Help
system.
Your Answering System automatically returns
to Standby.
Press
[#]+[1]
[#]+[2]
[#]+[3]
[#]+[4]
[#]+[5]
[#]+[6]
[#]+[7]
[#]+[8]
[#]+[9]
[#]+[0]
31