Using Your Phone; Making Calls; Receiving Calls - Uniden EXAI 918 Operating Manual

Please refer to the foldout in front of your operating guide for key positions.
When you have connected power and a telephone line to your EXAI918, the phone is in the
"standby mode," ready to receive and make calls.

Making Calls

1. Remove the Handset from the Base Unit.
2. Dial the number you
wish to call. For
example, 123 - 4567
3. If you entered a
wrong number,
press chan/delete to
backspace until the
number is erased.
To cancel making the call, press volume/cancel .
4. Press talk . The LCD
displays the
channel number.
Note: If the Handset fails to connect with the Base
Unit the Handset beeps and returns to
standby mode.
5. During your
conversation the
LCD displays the
call timer.
When you have finished with the conversation,
press talk to hang up.
— OR —
Place the Handset back on the Base Unit.
EXAI918

Using Your Phone

CIDCW ON
1234567
CIDCW ON
123456
CH-10
CH-10
CIDCW ON
00:00:01

Receiving Calls

Note: You must subscribe to Caller ID services
from your local phone company for the
caller's name and number to be displayed.
When the phone
rings, the LCD
displays a calling
screen for two
rings.
If Caller ID information about the person
calling is not available, this screen remains
on until you answer the call.
— OR —
If the Caller ID
information is
received, the LCD
displays:
— OR —
If the signal is
invalid, the LCD
displays:
— OR —
If the number of the
person calling is a
private number, the
LCD displays:
— OR —
If the name of the
person calling is a
private name, the
LCD displays:
— OR —
If the number of the
person calling is
unknown, the LCD
displays:
— OR —
LINE ERROR
CALLING
KATHLEEN ROL
817-858-3333
LINE ERROR
UKNOWN NUM.
PRIVATE NAME
PRIVATE NUM.
PRIVATE NAME
817-858-3333
UKNOWN NAME
UKNOWN NUM.
19