Cleaning The Battery Contacts; Charging The Battery Pack; Low Battery Indicator - Uniden EXAI 918 Operating Manual

Cleaning the Battery Contacts

To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit
about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents.

Charging the Battery Pack

Initial Battery Charging
The rechargeable Nickel-Cadmium battery pack
must be fully charged before using your phone for
the first time. We recommend that the battery pack
charge for approximately 15-20 hours, without
interruption, before plugging the phone line into
your new phone.
1. Place the Handset
on the Base Unit.
Note: You can
place the Handset
face down or face
up.
—OR—
Hang the Handset
on the cradle when
the phone is
mounted on a wall.
Note: Make sure to
change the Handset
Retainer before
hanging up the
phone.
14
2. Make sure the
Battery icon lights.
If the icon doesn't
light, check to see
that the AC adapter
is plugged in, and
that the Handset is
making good
contact with the
Base Unit charging
contacts.

Low Battery Indicator

When the Battery
Pack in the Handset
is very low and
needs to be
charged, the
Battery icon
flashes.
EXAI918