Direct.wall.mounting - Uniden TRU9360-2 Owner's Manual

Multi-handset phone
Hide thumbs Also See for TRU9360-2:
Table of Contents

Advertisement

Direct Wall Mounting
If.you.don't.have.a.standard.wall.plate,.you.can.mount.your.phone.directly.to.the.wall..Before.doing.this,.consider.the.
following:
Avoid.electrical.cables,.pipes,.or.other.items.behind.the.mounting.location.that.could.cause.a.hazard.when.
inserting.screws.into.the.wall.
Try.to.mount.your.phone.within.5-feet.of.a.working.phone.jack.to.avoid.excessive.wire.lengths.
Make.sure.the.wall.material.is.capable.of.supporting.the.weight.of.the.base.and.handset.
Use.#0.screws.with.a.minimum.length.of.-3/8.inches,.with.anchoring.devices.suitable.for.the.wall.material.
where.the.base.unit.will.be.placed.
)
Insert.two.mounting.screws.into.the.wall,.using.the.appropriate.
anchoring.device,.3-5/6.inches.apart..Allow.about./8.inch.between.
the.wall.and.screw.heads.for.mounting.the.phone.
2)
Refer.to.the.steps.on.page.3.to.complete.the.mounting.process.
4
TOP
TOP
1/8 in.
1/8 in.
3-15/16 in.
3-15/16 in.
1-3/8 in.
1-3/8 in.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tru9360 series

Table of Contents