Using Caller Id; The Caller Id Display; Viewing Calls In Memory - Uniden EXAI 918 Operating Manual

The Caller ID Display

The LCD displays information about the current call and previous calls received on your EXAI918
cordless phone, including the total calls received, and the number of new calls received.
The LCD display backlight is always active while the Handset is on the Base. When the Handset is
removed from the Base, the LCD display backlight turns off immediately. To reactivate the LCD
backlight, you need to press caller id .
LCD with Handset on Base
NO NEW CALLS
LCD with Handset off Base and Caller ID Pressed
TOTAL CALLS
10
NO NEW CALLS
Note: The EXAI918 can store information on up to 30 different calls. Information on new calls received
after 30 calls will be stored, and the oldest call in memory will be deleted.

Viewing Calls in Memory

1. The status LED
blinks, indicating
when you have
received new calls.
2. Remove the Handset from the Base Unit.
3. Press caller id .
4. To view calls stored
in memory, Press
the M or L keys.
EXAI918

Using Caller ID

TOTAL CALLS
10
KATHLEEN ROL
817-858-3333
To dial the number currently displayed, press
the talk key.
To add a 1 for long distance dialing, press 1
and then press the talk key.
Note: If the number is longer than 12 digits, the
display will scroll to the left until the last
number is shown in the display.
5. To see all calls
stored in memory,
press the L key
repeatedly until the
LCD displays END.
6. To see the time and day a call was received:
a. While the name
and number are
displayed,
press *.
b. To return to the
name and number
display, press *.
NEW TOTAL
02 10
WITH NEW CALLS
NEW TOTAL
02 10
WITH NEW CALLS
END
817-858-3333
05-10
10:05 AM 18
21