Appliance Shipping Container Contents; Electrical And Environmental Requirements; Heat Dissipation - VERITAS 5150 Hardware Installation Manual

Appliance shipping container contents

Electrical and environmental requirements

Heat dissipation

Optional: For SAS tape-out capability only. A SAS cable with at least one SAS-3
■
connector. The second connector can be SAS-2 or SAS-3 depending on the
type of tape-out device the customer uses.
A USB-keyboard and a monitor to connect to the appliance.
■
A 19-inch rack with dual Power Distribution Units (PDUs) with 120VAC or
■
220VAC power supplies.
The following items ship within the appliance box.
Open Me First container, containing:
■
Cabling and remote management configuration card
■
Warranty and license information
■
Safety/Compliance flyer
■
Rail installation card
■
Two power cables
■
Bezel
■
This section lists the electrical and environmental specifications for the Veritas 5150
Appliance.
Electrical requirements:
100 - 127 V, 10A (2 power cords) at 50/60 Hz
■
200 - 240 V, 5A (2 power cords) at 50/60 Hz
■
Environmental requirements:
10°C to 35°C (50°F to 95°F)
■
Air flows from the front of each unit and exits from the rear of each unit. You can
install the optional bezel without disruption to the airflow.
For best ventilation, the rack cabinet (if installed) should:
Be at least 100 cm (4 feet) from walls.
■
Preinstallation requirements
Appliance shipping container contents
18