Installing An Ip21 Component - Huawei UPS5000-E-400K Series User Manual

UPS5000-E-(400 kVA-600 kVA)
User Manual (60 kVA Power Modules)
Figure 3-17 Locking the antiseismic kits to the ground
Step 7 Reinstall the support baffle plates and rear covers in the cabinet.
Step 8 Install the front, rear, left, and right anchor baffle plates.
----End

3.2.3.2 Installing an IP21 Component

Procedure
Step 1 Install leveling feet at the bottom of the IP21 component, with two long feet on the front and
two short feet at the rear.
Figure 3-18 Installing leveling feet
Step 2 Secure the IP21 component to the top of each cabinet using four M12 screws.
Issue 05 (2019-12-24)
 Refer to the "front" and "back" silk screens on the surface of the IP21 component.
 Select the mounting holes for leveling feet based on the cabinet width onsite.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
65